Skip to main content
HTCOHow To Change OilSearch

How to Reset the Oil Change Light on Your Chevy Trax

By Rae CastellanoEngines & Vehicles Writer

Understanding the Oil Change Light

Your Chevy Trax has a maintenance reminder system that alerts you when it's time for an oil change. This light appears on your dashboard to help you keep track of your vehicle's service schedule. Once you've had your oil changed, you'll need to reset this light so it can track the next service interval.

Steps to Reset the Oil Change Light

The process for resetting your oil change light is straightforward and takes just a few minutes. Here's how to do it:

Method 1: Using the Dashboard Controls

  1. Turn on the ignition without starting the engine. Press the power button twice so the dashboard lights up.
  2. Locate the menu button on your steering wheel (usually on the left side).
  3. Use the up or down arrows to scroll through the menu until you see "Oil Life" or "Service" options.
  4. Once you find the oil life display, press and hold the button until a reset prompt appears on your screen.
  5. Select "Yes" or "Reset" when prompted. The light should disappear within a few seconds.

Method 2: Using the Info Center Button

  1. Turn on your vehicle without starting the engine.
  2. Press the "Info" button on your steering wheel repeatedly until the oil life percentage appears.
  3. Press and hold the "Reset" or "Enter" button until the system asks you to confirm.
  4. Select "Yes" to complete the reset.

What to Do If the Light Won't Reset

If you've followed these steps and the light remains on, try these troubleshooting tips:

  • Make sure your engine is completely off before starting the reset process.
  • Check your owner's manual for your specific model year, as procedures can vary slightly.
  • Ensure the oil change has actually been performed. Some vehicles won't let you reset the light if the system detects no service was done.
  • Try the reset process again, holding the button longer if needed.

When to Reset Your Oil Change Light

Reset your oil change light immediately after your oil has been changed—whether you do it yourself or have it done at a service center. This ensures your next reminder will be accurate based on your vehicle's maintenance schedule.

Key Takeaways

Resetting your Chevy Trax's oil change light is an easy task you can complete in your driveway. Use your steering wheel controls to navigate the menu and select the reset option. If you run into trouble, consult your owner's manual for your specific model year's instructions.